VACUUM FLASK & KETTLE LINES TURNKEY AUTOMATION
Heat the flask, read the outer wall, let the number decide pass or fail. We build that station — and the polishing, rolling and seam welding, screw driving and riveting around it. Single machine, station, or the whole line. Our floor is in Zhongshan, Guangdong, and you are welcome to watch the machines run.
SURFACE FINISHING AUTOMATED POLISHING
Hand polishing depends on how the operator feels that morning, and on finding people willing to stand in the dust. We fix force, dwell time and path as parameters: multi-station belt and wheel machines, single unit or linked with robots and conveyors into a polishing line.
WELDING LASER SEAM WELDING
Non-contact laser seam welding: no raised bead to grind back, a dense weld. That seam decides whether the vacuum holds — and whether the flask passes insulation test at the end of the line. Everything upstream is wasted if this one step is wrong.
Core processes
Test · Polish
Weld · Fasten
Only these. Not everything.
Process parameters
Change the part
not the setup
Calibrated on your product
Materials
304 / 316
stainless
Cups, kettles, bowls, pans
Delivery
Machine · Station
Full line
Sized to part and output
PRODUCTS & SOLUTIONS
Seven lines, each one a single process problem: what the machine does, which step it replaces, what it fits, and how it is commissioned and accepted. Output and dimensions are calibrated on your part — the proposal states the numbers we will hold ourselves to.
01 / SURFACE FINISHING
Replaces hand polishing: stable cycle, repeatable force, one surface quality. Single unit scales to multiple machines linked into a line.
Details →
02 / INSPECTION
In-house infrared heating plus multi-point contact measurement. Pass or fail decided by the reading, results logged, MES-ready.
Details →
03 / WELDING
Roll forming and seam welding in one machine: non-contact, no raised bead, dense seam.
Details →
04 / WELDING
Dedicated kettle spout welder. Dual touch screens, clean weld appearance, recipes for changeover.
Details →
05 / ASSEMBLY
Turntable stations with vibratory feeding: consistent torque, missed screws detected. Usually the cheapest upgrade that pays back.
Details →
06 / ASSEMBLY
Three, four or five stations. Force and stroke fixed as parameters — fast cycle, consistent joint.
Details →BY INDUSTRY
The machine answers one step. Tell us the part and the step, and we will say whether it is a single station or a line — including when it is neither.
01 / VACUUM FLASKS & KETTLES
The three steps that decide whether the product holds heat at all. If the seam is wrong, every step before it is wasted.
See the process →02 / STAINLESS COOKWARE
Polishing is slow, dusty, and hard to staff; riveting is heavy manual work. Both are high-return places to start.
See the process →03 / SMALL APPLIANCES
Inconsistent torque and drifting output are the most common sources of rework on an assembly line.
See the process →04 / PACKAGING
Packing is often the bottleneck before shipping. Built and commissioned as one line at a single takt.
See the process →TURNKEY DELIVERY
Process planning, line layout, equipment integration, installation, commissioning and training — sized to your part specification and output target. Our own team is in Zhongshan, an hour from most of the Pearl River Delta.
01
Process planning
Steps and takt from your part spec
02
Line layout
Layout drawing against your building
03
Core stations
Test / weld / polish, built in-house
04
Supporting equipment
Polish · test · assembly · packing
05
Install & commission
On site, parameters dialled in
06
Training & support
Operator training, long-term response
| Line scale | Assessed against part, processes and building — stated in the proposal |
| Lead time | Set by machine complexity and schedule; fixed in writing before contract |
| Scope | Planning / layout / equipment / installation / commissioning / training / after-sales |
| Service area | Guangdong and the Pearl River Delta first; other regions and export projects assessed case by case |
DELIVERED
Customer names and shop-floor footage are published only with the customer's consent. What follows is by industry and region; for a specific case we can show you the running line on site or on a call.
VACUUM FLASK · GUANGDONG
Replaced an existing TIG station. Cleaner seam, better seal consistency, and less load on the polishing step downstream.
STAINLESS HOLLOWARE · GUANGDONG
Line planning and layout, several polishing machines linked, with an inspection station tied into the existing line.
SMALL APPLIANCES · PRD
Multi-station automatic fastening: consistent torque and stable cycle, less rework at final assembly.
WHY US
01
Test, polishing, rolling and welding, fastening, packaging. We do not sell "automation" in general — every station is aimed at one real step in a flask or kettle line.
02
Rolling and welding are one station. The insulation check is a logged process step, not a person with a thermometer. We own takt and yield together, not one machine in isolation.
03
This is not a prototype shop. Delivered machines and the process parameters behind them are on file — you can come and see them.
04
Zhongshan, Guangdong. Factory visits, live demos and fast follow-up on site. For overseas projects we plan commissioning and spares up front, because a flight is not a service plan.
Zhongshan winyam Intelligent Technology Co., Ltd. builds automation for stainless vacuum flask and kettle lines: insulation testing, polishing, rolling and laser seam welding, screw driving and riveting, blister packaging. We handle process planning, line layout, equipment integration, installation, commissioning and operator training, delivered against the customer's part specification and output target.
| Legal name | Zhongshan winyam Intelligent Technology Co., Ltd. |
| Location | Torch Development Zone, Zhongshan, Guangdong, China |
| Focus | Vacuum flask & kettle line automation |
| Website | en.winyam.com |
GET IN TOUCH
Send the part, the material, the target output and the step that hurts. You get a process and layout answer first — price comes after we agree the process is right.
Contact
Johnny Liao
General Manager
Factory
No.6 Shabian Road, Torch Development Zone,
Zhongshan, Guangdong, China
Languages
English (email / WhatsApp)
中文 (phone / WeChat)
